Kirisun TR850 DMR Repeater

Professional 3U Design

Professional 3U design leaves enough space for an added duplexer and is suitable for both desk-top, cabinet and rack installations.

Outstanding Heat Dissipation

The unique cooling design combines a built-in heat pipe and an intelligent control fan, ensuring very efficient heat dissipation preventing the repeater from over-heating in high output power mode.

Smart Digital-Analog auto detection

TR850 can be configured to analog, digital or mixed mode. When configured to mixed mode, the repeater can dynamically switch between analog and digital depending on the type of call it receives.

Accessory Expansion

TR850 supports third party development via a rear port of the repeater. This is achieved via the signal streaming and pin control through the repeater ports.

IP Connecting

IP connecting is a function, which enables repeaters in different areas to switch data, voice and packets over a TCP/IP based network.

LED Indicator

There are 9 LED indicators on the front of panel to enable you to identify the repeater status clearly.

Software Upgradable to DMR Tier2 or Tier3

The advanced features can be upgraded to your existing TR850 repeaters by software without purchasing a new one. By software upgrading, the repeater can be upgrade to used as DMR Tier2 repeater or DMR Tier3 transetransceiver.

מפרט טכני

General

Channel Capacity

16

RF Output

45W(VHF) / 40W(UHF)

Transmitting Current Drain

<15A(45W)

Frequency Range

136-174MHz / 400-470MHz

Channel Spacing

12.5kHz / 20kHz / 25kHz

Dimensions

482.5mm*338.5mm*132.5mm

Weight

11.5Kg

Operating Temperature

-30℃~+60℃

Operating Voltage

DC13.8±20%   Option:AC 100—250V 50/60Hz

Storage Temperature

-40℃~+85℃

ESD

IEC 61000-4-2(level 4)

Max Duty Cycle

100%

Transmitter

Frequency Stability

±0.5 ppm

RF Output

45W(VHF) / 40W(UHF)

FM Hum and Noise

-40dB@12.5kHz   -45dB@20kHz/25kHz

Conducted/Radiated Emission

-36dBm@<1GHz, -30dBm@>1GHz

Adjacent Channel Power

-60dB@12.5kHz, -70dB@20kHz/25kHz

FM Modulation Mode

12.5KHz:11KΦF3E   25KHz:16KΦF3E

Modulation Maximum Deviation

2.5kHz@12.5kHz   , 4kHz@20kHz/5kHz@25kHz

Audio Response

+1dB,-3dB

Audio Distortion

 < 3%

Vocoder

AMBE+2

4FSK Digital Modulation

12.5KHz(data only):7K60FXD, 12.5KHz(data+voice):7K60FXE

Receiver

Frequency Stability

±0.5 ppm

Analog Sensitivity

<0.30μV (12dB SINAD)

Digital Sensitivity

<0.30μV (5%BER)

Intermodulation

TIA603:75dB   ETSI:75dB

Adjacent Channel Selectivity

TIA603:70dB @ 12.5 kHz / 75dB @ 20/25 kHz

ETSI: 70dB @ 12.5 kHz / 75dB @ 20/25 kHz

Spurious Response Rejection

TIA603:75dB   ETSI:70dB

Conducted Spurious Emission

-57dBm@ < 1GHz,-47dBm @> 1GHz

Rated Audio Distortion

 < 3%

Hum and Noise

-40dB@12.5kHz,   -45dB@20kHz/25kHz

Audio Response

+1dB,-3dB

פתרונות

מוצרים נוספים

פתרונות התקשוב והתקשורת היעילים ביותר

מעוניינים במידע נוסף? השאירו פרטים ונחזור בהקדם

פתרונות התקשוב והתקשורת היעילים ביותר

השאירו פרטים להורדת הברושור

דילוג לתוכן